Angler

line_spacer

A Serious Catch

Horizon Aluminium Boats' range of heavy duty dinghies comprises an extensive ten model range.

If you're into fishing and cruising, there's an Angler model to suit your needs.

Ranging from 3.15-metres through to a spacious and beamy 5.25-metres, the Angler range covers small boating needs from car topping to water sports.

With an efficient deep vee entry, a smooth riding hull shape and thoughtful design considerations built-in, the Angler heavy duty dinghy range is the way to go for those seeking a tough, rugged craft able to withstand the harsh marine environment.

Like all boats in the extensive Horizon range, the Angler series is constructed from the finest marine grade aluminium.

Depending on size, the Angler breed is suited to outboard horsepower from 5hp to 60hp.  

 

colorpicker-banner-button.jpg

Series

Horizon - HP Hull - 315 - 400 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

315 Angler Specs

Length Overall 3.15m
Beam 1.50m
Depth 0.75m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 74kg
Horsepower Rec. 6hp
Horsepower Max 8hp
Pax 2 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Bow handle x 2
  • 1.6mm Pressed Bottom sheets
  • Two transom handles
  • Foredeck - Flat
  • Back board
  • Welded cross thwarts front and rear
  • Double bow eye
  • Cross thwart flotation
  • Screw in bung x 2 small 25mm
  • Anchor shelf with tie off point
  • Transom strut
  • 2 x Rowlocks Blocks
  • One plastic Cleat on foredeck
  • Solid transom corners
  • Australian Builders Plate

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck
  • Rear Step and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

Horizon - HP Hull - 315 - 400 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

355 Angler Specs

Length Overall 3.55m
Beam 1.65m
Depth 0.85m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 76kg
Horsepower Rec. 9hp
Horsepower Max 15hp
Pax 2 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Bow handle x 2
  • 1.6mm Pressed Bottom sheets
  • Two transom handles
  • Foredeck - Flat
  • Back board
  • Welded cross thwarts front and rear
  • Double bow eye
  • Cross thwart flotation
  • Screw in bung x 2 small 25mm
  • External Keel
  • Transom strut
  • Anchor shelf with tie off point
  • One plastic Cleat on foredeck
  • 2 x Rowlocks Blocks
  • Australian Builders Plate
  • Solid transom corners

 

 

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Front Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

Horizon - HP Hull - 315 - 400 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

375 Angler Specs

Length Overall 3.75m
Beam 1.65m
Depth 0.85m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 86kg
Horsepower Rec. 15hp
Horsepower Max 20hp
Pax 3 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Bow handle x 2
  • 1.6mm Pressed Bottom sheets
  • Two transom handles
  • Foredeck - Flat
  • Back board
  • Welded cross thwarts front and rear
  • Double bow eye
  • Cross thwart flotation
  • Screw in bung x 2 small 25mm
  • External Keel
  • Transom strut
  • Anchor shelf with tie off point
  • One plastic Cleat on foredeck
  • 2 x Rowlocks Blocks
  • Australian Builders Plate
  • Solid transom corners

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

 

 

Horizon - HP Hull - 315 - 400 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

385 Angler Specs

Length Overall 3.85m
Beam 1.80m
Depth 1.00m
Bottom Sheet 1.6mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 115kg
Horsepower Rec. 20hp
Horsepower Max 25hp
Pax 4 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Two transom handles
  • 1.6mm Pressed Bottom sheets
  • Back board
  • Foredeck - Flat
  • Double bow eye
  • Welded cross thwarts front and rear
  • Screw in bung x 2 small 25mm
  • Cross thwart flotation
  • Transom strut
  • External Keel
  • One plastic Cleat on foredeck
  • Anchor shelf with tie off point
  • 2 x Rod Holders
  • 2 x Rowlocks Blocks
  • Glove box in thwart seat
  • Solid transom corners
  • Half fuel tank rack
  • Bow handle x 2
  • Australian Builders Plate

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

 

 

Horizon - HP Hull - 315 - 400 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

400 Angler Specs

Length Overall 4.00m
Beam 1.80m
Depth 1.00m
Bottom Sheet 2.0mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 125kg
Horsepower Rec. 20hp
Horsepower Max 30hp
Pax 4 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Two transom handles
  • 2.0mm Pressed Bottom Sheets
  • Back board
  • Foredeck - Curved
  • Double bow eye
  • Welded cross thwarts front and rear
  • Screw in bung x 2 large 35mm
  • Cross thwart flotation
  • Transom strut
  • External Keel
  • One plastic Cleat on foredeck
  • Anchor shelf with tie off point
  • 2 x Rod Holders
  • 2 x Rowlocks Blocks
  • Glove box in thwart seat
  • Solid transom corners
  • Half fuel tank rack
  • Bow handle x 2
  • Australian Builders Plate

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

 

 

Horizon - HP Hull - 415 - 525 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

415 Angler Specs

Length Overall 4.15m
Beam 1.95m
Depth 1.10m
Bottom Sheet 3.0mm
Side Sheet 1.6mm
Transom LS
Weight (boat only) 170kg
Horsepower Rec. 30hp
Horsepower Max 40hp
Pax 4 ppl

Features

  • 1.6mm Pressed Side Sheets
  • Carpeted low floor between seats with small frames
  • 3.0mm Pressed Bottom Sheets
  • Double bow eye
  • Foredeck - Curved
  • Screw in bung x 2 large 35mm
  • Welded cross thwarts front and rear
  • Transom strut
  • Cross thwart flotation
  • One welded Cleat on foredeck
  • External Keel
  • 2 x Rod Holders
  • Anchor shelf with tie off point
  • Glove box in thwart seat
  • 2 x Rowlocks Blocks
  • Transducer bracket
  • Solid transom corners
  • Full length fuel tank rack
  • Bow handle x 2
  • Bilge Pump Bracket
  • Two transom handles
  • Australian Builders Plate
  • Back board

 

 

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

 

 

Horizon - HP Hull - 415 - 525 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

435 Angler Specs

Length Overall 4.35m
Beam 1.95m
Depth 1.10m
Bottom Sheet 3.0mm
Side Sheet 2.0mm
Transom LS
Weight (boat only) 190kg
Horsepower Rec. 40hp
Horsepower Max 50hp
Pax 4 ppl

Features

  • 2.0mm Pressed Side Sheets
  • Carpeted low floor between seats with small frames
  • 3.0mm Pressed Bottom Sheets
  • Double bow eye
  • Foredeck - Curved
  • Screw in bung x 2 large 35mm
  • Welded cross thwarts front and rear
  • Transom strut
  • Cross thwart flotation
  • One welded Cleat on foredeck
  • External Keel
  • 2 x Rod Holders
  • Anchor shelf with tie off point
  • Glove box in thwart seat
  • 2 x Rowlocks Blocks
  • Transducer bracket
  • Solid transom corners
  • Full length fuel tank rack
  • Bow handle x 2
  • Bilge Pump Bracket
  • Two transom handles
  • Australian Builders Plate
  • Back board

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

Horizon - HP Hull - 415 - 525 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

445 Angler Specs

Length Overall 4.45m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 2.0mm
Transom LS
Weight (boat only) 230kg
Horsepower Rec. 40hp
Horsepower Max 60hp
Pax 5 ppl

Features

  • 2.0mm Pressed Side Sheets
  • Carpeted low floor between seats with small frames
  • 3.0mm Pressed Bottom Sheets
  • Double bow eye
  • Foredeck - Curved
  • Screw in bung x 2 large 35mm
  • Welded cross thwarts front and rear
  • Transom strut
  • Cross thwart flotation
  • One welded Cleat on foredeck
  • External Keel
  • 2 x Rod Holders
  • Anchor shelf with tie off point
  • Glove box in thwart seat
  • 2 x Rowlocks Blocks
  • Transducer bracket
  • Solid transom corners
  • Full length fuel tank rack
  • Bow handle x 2
  • Bilge Pump Bracket
  • Two transom handles
  • Australian Builders Plate
  • Back board

 

 

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

Horizon - HP Hull - 415 - 525 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

465 Angler Specs

Length Overall 4.65m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 2.0mm
Transom LS
Weight (boat only) 240kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 5 ppl

Features

  • 2.0mm Pressed Side Sheets
  • Carpeted low floor between seats with small frames
  • 3.0mm Pressed Bottom Sheets
  • Double bow eye
  • Foredeck - Curved
  • Screw in bung x 2 large 35mm
  • Welded cross thwarts front and rear
  • Transom strut
  • Cross thwart flotation
  • One welded Cleat on foredeck
  • External Keel
  • 2 x Rod Holders
  • Anchor shelf with tie off point
  • Glove box in thwart seat
  • 2 x Rowlocks Blocks
  • Transducer bracket
  • Solid transom corners
  • Full length fuel tank rack
  • Bow handle x 2
  • Bilge Pump Bracket
  • Two transom handles
  • Australian Builders Plate
  • Back board

 

 

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks

Horizon - HP Hull - 415 - 525 Angler.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

525 Angler Specs

Length Overall 5.25m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 2.0mm
Transom LS
Weight (boat only) 260kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 5 ppl

Features

  • 2.0mm Pressed Side Sheets
  • Carpeted low floor between seats with small frames
  • 3.0mm Pressed Bottom Sheets
  • Double bow eye
  • Foredeck - Curved
  • Screw in bung x 2 large 35mm
  • Welded cross thwarts front and rear
  • Transom strut
  • Cross thwart flotation
  • One welded Cleat on foredeck
  • External Keel
  • 2 x Rod Holders
  • Anchor shelf with tie off point
  • Glove box in thwart seat
  • 2 x Rowlocks Blocks
  • Transducer bracket
  • Solid transom corners
  • Full length fuel tank rack
  • Bow handle x 2
  • Bilge Pump Bracket
  • Two transom handles
  • Australian Builders Plate
  • Back board

 

 

Options

  • Paint Internal and External
  • Decals two Colours
  • Carpeted Floor between the Seats
  • Bow Rails
  • Side Rails
  • Casting Deck off Front Seat
  • Rear Casting Deck.
  • RearStep and Rail
  • Transducer Bracket
  • Fuel Tank Rack
  • Electric Motor Mount
  • Side Decks