Stryker XPF Hydrolift

line_spacer

A Strikingly Versatile Boat

Built like a tank with ribs spaced 350 mm apart through out the whole boat, 3 mm bottoms and sides and fully welded under gunwales, the Stryker range is fast becoming the boat to have for family and fishing alike.

Built around the Hydro Lift hull and boasting a beam of 2.06m this gives the Stryker great stability while flicking lures and moving around the boat. 

Series

Horizon - Stryker XPF.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

438 Stryker XPF Hydrolift Specs

Length Overall 4.50m
Length Bow to Transom 4.4m
Beam 2.06m
Depth 1.1m
Bottom Sheet 3mm
Side Sheet 3mm
Transom L/S
Weight (boat only) 295kg
Horsepower Rec. 30hp
Horsepower Max 50hp
Max Transom Weight 120KG
Pax 4 ppl

Features

  • 3mm Smooth Side sheets
  • Pedestal Seats x 2
  • 3mm Pressed Bottom sheets
  • Bow Rails and Bow sprit
  • Hydrolift Hull with Reverse Chines
  • Side Rails
  • Checkerplate foredeck
  • Rear Step & Rail x 2
  • Extruded Side Decks - Fully Welded
  • Side Pockets - with Sounder Mount Starboard side
  • RAILBLAZA TracLoader Coaming
  • Fuel tank rack with Timber top
  • Front Casting Deck - with Low Floor
  • Cleat in Anchor Well
  • Rear Casting Deck
  • Bilge Pump Bracket
  • Anchor Well - Self Draining
  • Transducer Bracket
  • Small Splash Well
  • Screw in Bung 2 x large 35mm
  • Plumbed Live Bait Tank
  • Painted White In and Out
  • Full Carpeted Floor with Under Floor Flotation
  • Decals Two Colours
  • Underfloor Storage with Hatch
  • Australian Builders Plate
  • Plug In Seat Bases x 4

Options

  • Electric Motor Mount
  • Rod Locker
  • Paint
  • Two Tone Paint
  • Underfloor storage drainage through transom
  • Side control panel
  • 50lt underfloor fuel tank - with sender

Horizon - Stryker XPF.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

454 Stryker XPF Hydrolift Specs

Length Overall 4.65m
Length Bow to Transom 4.55m
Beam 2.06m
Depth 1.1m
Bottom Sheet 3mm
Side Sheet 3mm
Transom L/S
Weight (boat only) 302kg
Horsepower Rec. 40hp
Horsepower Max 60hp
Max Transom Weight 120KG
Pax 4 ppl

Features

  • 3mm Smooth Side sheets
  • Pedestal Seats x 2
  • 3mm Pressed Bottom sheets
  • Bow Rails and Bow sprit
  • Hydrolift Hull with Reverse Chines
  • Side Rails
  • Checkerplate foredeck
  • Rear Step & Rail x 2
  • Extruded Side Decks - Fully Welded
  • Side Pockets - with Sounder Mount Starboard side
  • RAILBLAZA TracLoader Coaming
  • Fuel tank rack with Timber top
  • Front Casting Deck - with Low Floor
  • Cleat in Anchor Well
  • Rear Casting Deck
  • Bilge Pump Bracket
  • Anchor Well - Self Draining
  • Transducer Bracket
  • Small Splash Well
  • Screw in Bung 2 x large 35mm
  • Plumbed Live Bait Tank
  • Painted White In and Out
  • Full Carpeted Floor with Under Floor Flotation
  • Decals Two Colours
  • Underfloor Storage with Hatch
  • Australian Builders Plate
  • Plug In Seat Bases x 4

Options

  • Electric Motor Mount
  • Rod Locker
  • Paint
  • Two Tone Paint
  • Underfloor storage drainage through transom
  • Side control panel
  • 50lt underfloor fuel tank - with sender
More From HP Hull Open Boats