Gulf

Horizon's Hydro Lift hull has been meticulously designed to provide exceptional stability, handling, durability, and performance. Whether it's fishing, boating, or just a day out with the family, this hull is up to the task.

line_spacer
line_spacer

Nothing Beats a Round on the Gulf

Horizon Aluminium Boats has a superb range of vee bow punts ideally suited to those delightful days fishing Australia's lakes and estuaries.

Unlike many lesser breeds, these vee bow punts offer that stability, but combine it with a softer ride than one would expect thanks to its sharper entry. This allows for easier handling even when choppy conditions are encountered. Built with top grade marine aluminium and incorporating full internal framing and with internal flotation, the range stands ready to offer years of trouble-free boating. 

line_spacer

colorpicker-banner-button.jpg

Series

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

445 Gulf Specs

Length Overall 4.45m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 300kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 4 ppl

Features

  • 3 mm 5083 smooth side sheets
  • 3 mm 5083 pressed bottom sheets
  • Fully welded checkerplate foredeck
  • Fully welded rolled side decks
  • Rib spacing every 300 mm
  • Carpeted full floor
  • Underfloor flotation
  • Two pedestal-mounted folding seats
  • Four plug-in seat positions
  • Anchor shelf with tie-off point
  • One Welded Clet on Foredeck
  • Solid transom corners
  • Two bow handles
  • Two transom handles
  • Double bow eye
  • External keel
  • Transom strut
  • Two large 35 mm screw-in bungs
  • Transducer bracket
  • Unpainted
  • Australian Builders Plate

Options

  • Paint
  • Two-tone paint
  • Electric-motor mount
  • Front casting deck
  • Rear casting deck
  • Side console
  • Centre console
  • Underfloor fuel tank
  • Bowsprit and roller
  • Bow rails
  • Side rails
  • Rear step and rail
  • Anchor well

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

485 Gulf Specs

Length Overall 4.85m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 350kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 5 ppl

Features

  • 3 mm 5083 smooth side sheets
  • 3 mm 5083 pressed bottom sheets
  • Fully welded checkerplate foredeck
  • Fully welded rolled side decks
  • Rib spacing every 300 mm
  • Carpeted full floor
  • Underfloor flotation
  • Two pedestal-mounted folding seats
  • Four plug-in seat positions
  • Anchor shelf with tie-off point
  • One Welded Clet on Foredeck
  • Solid transom corners
  • Two bow handles
  • Two transom handles
  • Double bow eye
  • External keel
  • Transom strut
  • Two large 35 mm screw-in bungs
  • Transducer bracket
  • Unpainted
  • Australian Builders Plate

Options

  • Paint
  • Two-tone paint
  • Electric-motor mount
  • Front casting deck
  • Rear casting deck
  • Side console
  • Centre console
  • Underfloor fuel tank
  • Bowsprit and roller
  • Bow rails
  • Side rails
  • Rear step and rail
  • Anchor well

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

525 Gulf Specs

Length Overall 5.25m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 400kg
Horsepower Rec. 60hp
Horsepower Max 75hp
Pax 5 ppl

Features

  • 3 mm 5083 smooth side sheets
  • 3 mm 5083 pressed bottom sheets
  • Fully welded checkerplate foredeck
  • Fully welded rolled side decks
  • Rib spacing every 300 mm
  • Carpeted full floor
  • Underfloor flotation
  • Two pedestal-mounted folding seats
  • Four plug-in seat positions
  • Anchor shelf with tie-off point
  • One Welded Clet on Foredeck
  • Solid transom corners
  • Two bow handles
  • Two transom handles
  • Double bow eye
  • External keel
  • Transom strut
  • Two large 35 mm screw-in bungs
  • Transducer bracket
  • Unpainted
  • Australian Builders Plate

Options

  • Paint
  • Two-tone paint
  • Electric-motor mount
  • Front casting deck
  • Rear casting deck
  • Side console
  • Centre console
  • Underfloor fuel tank
  • Bowsprit and roller
  • Bow rails
  • Side rails
  • Rear step and rail
  • Anchor well