Gulf

Horizon's Hydro Lift hull has been meticulously designed to provide exceptional stability, handling, durability, and performance. Whether it's fishing, boating, or just a day out with the family, this hull is up to the task.

line_spacer
line_spacer

Nothing Beats a Round on the Gulf

Horizon Aluminium Boats has a superb range of vee bow punts ideally suited to those delightful days fishing Australia's lakes and estuaries.

Unlike many lesser breeds, these vee bow punts offer that stability, but combine it with a softer ride than one would expect thanks to its sharper entry. This allows for easier handling even when choppy conditions are encountered. Built with top grade marine aluminium and incorporating full internal framing and with internal flotation, the range stands ready to offer years of trouble-free boating. 

line_spacer

colorpicker-banner-button.jpg

Series

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

445 Gulf Specs

Length Overall 4.45m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 300kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 4 ppl

Features

  • 3mm 5083 Smooth Side sheets
  • Solid Transom Corners
  • 3mm 5083 Pressed Bottom sheets
  • Two Bow Handles
  • Checkerplate Foredeck (Fully welded)
  • Two Transom Handles
  • Rolled Side Decks (fully welded)
  • Double Bow Eye
  • Rib spacing every 300mm
  • External Keel
  • Carpeted Full Floor
  • Transom Strut
  • Underfloor Flotation
  • Screw in bung 2 x large 35mm
  • 2x Pedestal mounted Folding Seats
  • Transducer Bracket
  • 4 x Plug in Seat Positions
  • Unpainted
  • Anchor Shelf with tie off point
  • Australian Builders Plate
  • One Cross Bollard on Foredeck

Options

  • Paint
  • Two Tone Paint
  • Electric Motor mount
  • Front Casting deck
  • Rear Casting deck
  • Side Console
  • Centre Console
  • Undefloor Fuel Tank
  • Bow Sprit and Roller
  • Bow Rails
  • Side Rails
  • Rear Step and Rail
  • Anchor well

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

485 Gulf Specs

Length Overall 4.85m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 350kg
Horsepower Rec. 50hp
Horsepower Max 60hp
Pax 5 ppl

Features

  • 3mm 5083 Smooth Side sheets
  • Solid Transom Corners
  • 3mm 5083 Pressed Bottom sheets
  • Two Bow Handles
  • Checkerplate Foredeck (Fully welded)
  • Two Transom Handles
  • Rolled Side Decks (fully welded)
  • Double Bow Eye
  • Rib spacing every 300mm
  • External Keel
  • Carpeted Full Floor
  • Transom Strut
  • Underfloor Flotation
  • Screw in bung 2 x large 35mm
  • 2x Pedestal mounted Folding Seats
  • Transducer Bracket
  • 4 x Plug in Seat Positions
  • Unpainted
  • Anchor Shelf with tie off point
  • Australian Builders Plate
  • One Cross Bollard on Foredeck

Options

  • Paint
  • Two Tone Paint
  • Electric Motor mount
  • Front Casting deck
  • Rear Casting deck
  • Side Console
  • Centre Console
  • Undefloor Fuel Tank
  • Bow Sprit and Roller
  • Bow Rails
  • Side Rails
  • Rear Step and Rail
  • Anchor well

Horizon-Gulf.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

525 Gulf Specs

Length Overall 5.25m
Beam 2.20m
Depth 1.16m
Bottom Sheet 3.0mm
Side Sheet 3.0mm
Transom LS
Weight (boat only) 400kg
Horsepower Rec. 60hp
Horsepower Max 75hp
Pax 5 ppl

Features

  • 3mm 5083 Smooth Side sheets
  • Solid Transom Corners
  • 3mm 5083 Pressed Bottom sheets
  • Two Bow Handles
  • Checkerplate Foredeck (Fully welded)
  • Two Transom Handles
  • Rolled Side Decks (fully welded)
  • Double Bow Eye
  • Rib spacing every 300mm
  • External Keel
  • Carpeted Full Floor
  • Transom Strut
  • Underfloor Flotation
  • Screw in bung 2 x large 35mm
  • 2x Pedestal mounted Folding Seats
  • Transducer Bracket
  • 4 x Plug in Seat Positions
  • Unpainted
  • Anchor Shelf with tie off point
  • Australian Builders Plate
  • One Cross Bollard on Foredeck

Options

  • Paint
  • Two Tone Paint
  • Electric Motor mount
  • Front Casting deck
  • Rear Casting deck
  • Side Console
  • Centre Console
  • Undefloor Fuel Tank
  • Bow Sprit and Roller
  • Bow Rails
  • Side Rails
  • Rear Step and Rail
  • Anchor well