Northerner GRIDcore

line_spacer

Cast Your Gaze to the Northerner

Boats for the sportsman, there’s no other way to describe Horizon Aluminium Boats’ stunning Northerner range of sportfishing boats.

Comprising a six boat line up from 4.15-metres to 5.40-metres, there’s a Northerner to suit the most demanding angler.

Here is a boat offering attention to detail not often found, a smooth riding hull, a wide beam and side decks and a raised casting platform to ensure you put more fish on the table.

Not fishing today?

No worries, the Northerners are well suited for scuba diving expeditions, family cruising or simply relaxing.

As a component of the Horizon Aluminium Boats family, the Northerners are constructed from top level marine grade aluminium and boast build and fit out quality to ensure ‘no worries’ boating enjoyment.

Rated to perform to the max with outboard horsepower in the 25hp-115hp range.

colorpicker-banner-button.jpg

Series

Horizon - Northener.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

485 Northerner Specs

Length Overall 5.00m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 560kg
Horsepower Rec. 80hp
Horsepower Max 90hp
Pax 5 ppl

Features

  • 4mm 5083 high tensile Bottom Sheets
  • 12V bilge pump
  • 4mm 5052 Side Sheets
  • LED Navigation lights and Anchor light
  • 4mm Bulkheads and frame GRID fully welded to hull – not floating
  • Carpeted timber floor
  • Full height transom with twin boarding platforms
  • Australian Standards Approved underfloor foam floatation
  • Walk through Transom door
  • Long range aluminium fuel tank with sender unit
  • Fully welded gunnels and side decks
  • Heavy-duty dive boarding ladder
  • Extruded Side Decks
  • High 32mm Bow rails
  • RAILBLAZA TracLoader Coaming
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Enclosed rear transom with twin hatches
  • 32mm Transom rails
  • Large aluminium anchor well
  • 32mm Side rails
  • Raised front casting deck with access hatches
  • Large side pockets x 2
  • Sports side console with windscreen
  • Riveted aluminium Rod Holders x 4
  • Large dash facia for oversize electronics
  • Welded Alloy Cleat in Anchor Well x 1
  • SeaStar Extreme steering
  • Welded Alloy Cleats on Transom x 2
  • Sports Steering wheel
  • Cup holders x 2
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Transducer Brackets x 2
  • Tinned marine wiring harness with battery switch
  • Painted one colour in and out
  • 5 gang switch panel with 12V socket
  • Custom decals

Options

  • 5mm 5083 High Tensile Bottom Sheets
  • Lenco Trim Tabs
  • Fully welded Self draining Checkerplate floor

Horizon - Northener.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

525 Northerner Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90hp
Horsepower Max 115hp
Pax 5 ppl

Features

  • 4mm 5083 high tensile Bottom Sheets
  • 12V bilge pump
  • 4mm 5052 Side Sheets
  • LED Navigation lights and Anchor light
  • 4mm Bulkheads and frame GRID fully welded to hull – not floating
  • Carpeted timber floor
  • Full height transom with twin boarding platforms
  • Australian Standards Approved underfloor foam floatation
  • Walk through Transom door
  • Long range aluminium fuel tank with sender unit
  • Fully welded gunnels and side decks
  • Heavy-duty dive boarding ladder
  • Extruded Side Decks
  • High 32mm Bow rails
  • RAILBLAZA TracLoader Coaming
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Enclosed rear transom with twin hatches
  • 32mm Transom rails
  • Large aluminium anchor well
  • 32mm Side rails
  • Raised front casting deck with access hatches
  • Large side pockets x 2
  • Sports side console with windscreen
  • Riveted aluminium Rod Holders x 4
  • Large dash facia for oversize electronics
  • Welded Alloy Cleat in Anchor Well x 1
  • SeaStar Extreme steering
  • Welded Alloy Cleats on Transom x 2
  • Sports Steering wheel
  • Cup holders x 2
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Transducer Brackets x 2
  • Tinned marine wiring harness with battery switch
  • Painted one colour in and out
  • 5 gang switch panel with 12V socket
  • Custom decals

Options

  • 5mm 5083 High Tensile Bottom Sheets
  • Lenco Trim Tabs
  • Fully welded Self draining Checkerplate floor

Horizon - Northener.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

555 Northerner Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 650kg
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Features

  • 4mm 5083 high tensile Bottom Sheets
  • 12V bilge pump
  • 4mm 5052 Side Sheets
  • LED Navigation lights and Anchor light
  • 4mm Bulkheads and frame GRID fully welded to hull – not floating
  • Carpeted timber floor
  • Full height transom with twin boarding platforms
  • Australian Standards Approved underfloor foam floatation
  • Walk through Transom door
  • Long range aluminium fuel tank with sender unit
  • Fully welded gunnels and side decks
  • Heavy-duty dive boarding ladder
  • Extruded Side Decks
  • High 32mm Bow rails
  • RAILBLAZA TracLoader Coaming
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Enclosed rear transom with twin hatches
  • 32mm Transom rails
  • Large aluminium anchor well
  • 32mm Side rails
  • Raised front casting deck with access hatches
  • Large side pockets x 2
  • Sports side console with windscreen
  • Riveted aluminium Rod Holders x 4
  • Large dash facia for oversize electronics
  • Welded Alloy Cleat in Anchor Well x 1
  • Baystar Hydraulic steering
  • Welded Alloy Cleats on Transom x 2
  • Sports Steering wheel
  • Cup holders x 2
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Transducer Brackets x 2
  • Tinned marine wiring harness with battery switch
  • Painted one colour in and out
  • 5 gang switch panel with 12V socket
  • Custom decals

Options

  • 5mm 5083 High Tensile Bottom Sheets
  • Lenco Trim Tabs
  • Fully welded Self draining Checkerplate floor

Horizon - Northener.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

585 Northerner Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 710kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4mm 5083 high tensile Bottom Sheets
  • 12V bilge pump
  • 4mm 5052 Side Sheets
  • LED Navigation lights and Anchor light
  • 4mm Bulkheads and frame GRID fully welded to hull – not floating
  • Carpeted timber floor
  • Full height transom with twin boarding platforms
  • Australian Standards Approved underfloor foam floatation
  • Walk through Transom door
  • Long range aluminium fuel tank with sender unit
  • Fully welded gunnels and side decks
  • Heavy-duty dive boarding ladder
  • Extruded Side Decks
  • High 32mm Bow rails
  • RAILBLAZA TracLoader Coaming
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Enclosed rear transom with twin hatches
  • 32mm Transom rails
  • Large aluminium anchor well
  • 32mm Side rails
  • Raised front casting deck with access hatches
  • Large side pockets x 2
  • Sports side console with windscreen
  • Riveted aluminium Rod Holders x 4
  • Large dash facia for oversize electronics
  • Welded Alloy Cleat in Anchor Well x 1
  • SeaStar Hydraulic steering
  • Welded Alloy Cleats on Transom x 2
  • Sports Steering wheel
  • Cup holders x 2
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Transducer Brackets x 2
  • Tinned marine wiring harness with battery switch
  • Painted one colour in and out
  • 5 gang switch panel with 12V socket
  • Custom decals

Options

  • 5mm 5083 High Tensile Bottom Sheets
  • Lenco Trim Tabs
  • Fully welded Self draining Checkerplate floor

Horizon - Northener.jpg

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

625 Northerner Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 765kg
Horsepower Rec. 150hp
Horsepower Max 175hp
Pax 7 ppl

Features

  • 4mm 5083 high tensile Bottom Sheets
  • 12V bilge pump
  • 4mm 5052 Side Sheets
  • LED Navigation lights and Anchor light
  • 4mm Bulkheads and frame GRID fully welded to hull – not floating
  • Carpeted timber floor
  • Full height transom with twin boarding platforms
  • Australian Standards Approved underfloor foam floatation
  • Walk through Transom door
  • Long range aluminium fuel tank with sender unit
  • Fully welded gunnels and side decks
  • Heavy-duty dive boarding ladder
  • Extruded Side Decks
  • High 32mm Bow rails
  • RAILBLAZA TracLoader Coaming
  • Heavy-duty bow sprit with double rollers and rope keepers
  • Enclosed rear transom with twin hatches
  • 32mm Transom rails
  • Large aluminium anchor well
  • 32mm Side rails
  • Raised front casting deck with access hatches
  • Large side pockets x 2
  • Sports side console with windscreen
  • Riveted aluminium Rod Holders x 4
  • Large dash facia for oversize electronics
  • Welded Alloy Cleat in Anchor Well x 1
  • SeaStar Hydraulic steering
  • Welded Alloy Cleats on Transom x 2
  • Sports Steering wheel
  • Cup holders x 2
  • Pedestal mounted Deluxe helm seats on slides & swivels
  • Transducer Brackets x 2
  • Tinned marine wiring harness with battery switch
  • Painted one colour in and out
  • 5 gang switch panel with 12V socket
  • Custom decals

Options

  • 5mm 5083 High Tensile Bottom Sheets
  • Lenco Trim Tabs
  • Fully welded Self draining Checkerplate floor