Pacific GRIDcore

 

 

The result of years of in-house development, Horizon Boats' GRiDcore hull is equally at home during a relaxing family day on the water or a serious fishing session.

line_spacer
line_spacer

An Ocean of Possibilities Awaits

When it comes to interior plans, dedicated anglers have long had a love affair with the centre console.

Allowing a boat’s full circumference to be fished with ease, the centre console is equally highly regarded by scuba divers and explorers as a perfect boat for general boating expeditions.

The Pacific centre console range from Horizon Aluminium Boats is ‘right up there’ when it comes to centre console design, and nothing has been overlooked in producing a range of boats with broad appeal to the sportsman.

With the FastBack transom, raised casting platform, broad beam and fuel efficient hull shape, the Pacific range will win the hearts and minds of all.

Like its ‘stablemates’, the Pacific range is built, not thrown together.

Only the best marine grade alloys are used, while deck hardware and fittings come from the best suppliers around.

Take your pick of outboard power from 40hp to 150hp for maximum performance and maximum enjoyment.

line_spacer

colorpicker-banner-button.jpg

Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

492 Pacific Specs

Length Overall 5.00m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 560kg
Horsepower Rec. 80hp
Horsepower Max 115hp
Pax 5 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar Xtreme steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Anchor winch brackets
  • Custom decals
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

532 Pacific Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 685kg
Horsepower Rec. 90hp
Horsepower Max 140hp
Pax 5 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar Xtreme steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

562 Pacific Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 752kg
Horsepower Rec. 115hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • Dometic BayStar hydraulic steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 175 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

592 Pacific Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 825kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 200 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

632 Pacific Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 880kg
Horsepower Rec. 150hp
Horsepower Max 200hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 250 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

662 Pacific Specs

Length Overall 6.70m
Length Bow to Transom 6.60m
Beam 2.50m
Depth 1.50m
Bottom Sheet 5mm
Side Sheet 4mm
Transom XL
Weight (boat only) 955kg
Horsepower Rec. 175hp
Horsepower Max 200hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 250 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

732 Pacific Specs

Length Overall 7.70m
Beam 2.50m
Depth 1.50m
Bottom Sheet 5mm
Side Sheet 4mm
Transom XL
Weight (boat only) 1070kg
Horsepower Rec. 250hp
Horsepower Max 300hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front casting deck with access hatches
  • Two-piece folding centre console
  • Large dash fascia for oversized electronics
  • Moulded clear acrylic windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Helm seat box with upholstered cushion and swing backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 250 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount
  • Folding T-top with aluminium sheet roof and radio box