HomeBoat RangeGRIDcore Plate BoatsSunRunner GRIDcore

SunRunner GRIDcore

 

 

The result of years of in-house development, Horizon Boats' GRiDcore hull is equally at home during a relaxing family day on the water or a serious fishing session.

line_spacer
line_spacer

Chase the Sun

The most comprehensive range among the models released by Horizon Aluminium Boats is the outstanding SunRunner runabout series, a seven boat line-up encompassing all the fun and enjoyment that can be expected from recreational boating.

Ideally suited to general boating, fishing, water sports and diving, the SunRunner series will appeal to families, retired couples and keen anglers.

These smooth-riding, wide-beamed runabouts simply ooze efficiency and classic design.

Features built into this superb range border on too numerous to mention, but include the famed Horizon FastBack transom, outstanding fuel efficiency and spacious cockpit with ample stowage space.

One feature worthy of mention is versatility – Horizon Aluminium Boats’ SunRunner range can truly be termed genuine “all-rounders”, family boat, fishing boat, cruising boat, water sport boat, the SunRunner can do it all.

line_spacer

colorpicker-banner-button.jpg

Series
Print - 492 SunRunner

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

492 SunRunner Specs

Length Overall 5.00m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 648kg
Horsepower Rec. 80hp
Horsepower Max 115hp
Pax 5 ppl

Features

  • 4 mm 5052 aluminium side sheets
  • 4 mm bulkheads and frames, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front deck with large walk-through hatch
  • Under-deck storage compartments
  • Large dash fascia for oversized electronics
  • Tinted acrylic walk-through windscreen
  • Painted white inside and out
  • Two transducer brackets
  • Dometic BayStar hydraulic steering
  • Sports steering wheel
  • Deluxe pedestal-mounted helm seats with slides and swivels
  • Folding rear lounge with backrest
  • Captain’s Pack
  • Wiring harness
  • Blade fuse holder
  • Dual-battery switch with VSR
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with twin rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded anchor-well cleat and two welded transom cleats
  • Two cup holders
  • Anchor winch brackets
  • Custom decals
  • 4 mm 5083 high-tensile aluminium bottom sheets
  • Increased wiring gauge
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile aluminium bottom sheets
  • Lenco trim tabs
  • Fully welded self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Fixed-bar bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
Print - 532 SunRunner

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

532 SunRunner Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 700kg
Horsepower Rec. 90hp
Horsepower Max 140hp
Pax 5 ppl

Features

  • 4 mm 5052 aluminium side sheets
  • 4 mm bulkheads and frames, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front deck with large walk-through hatch
  • Under-deck storage compartments
  • Large dash fascia for oversized electronics
  • Tinted acrylic walk-through windscreen
  • Painted white inside and out
  • Two transducer brackets
  • Dometic BayStar hydraulic steering
  • Sports steering wheel
  • Deluxe pedestal-mounted helm seats with slides and swivels
  • Folding rear lounge with backrest
  • Captain’s Pack
  • Wiring harness
  • Blade fuse holder
  • Dual-battery switch with VSR
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with twin rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders

  • One welded anchor-well cleat and two welded transom cleats

  • Two cup holders
  • Anchor winch brackets
  • Custom decals
  • 4 mm 5083 high-tensile aluminium bottom sheets
  • Increased wiring gauge
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile aluminium bottom sheets
  • Lenco trim tabs
  • Fully welded self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Fixed-bar bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
Print - 562 SunRunner

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

562 SunRunner Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 740kg
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Features

  • 4 mm 5052 aluminium side sheets
  • 4 mm bulkheads and frames, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front deck with large walk-through hatch
  • Under-deck storage compartments
  • Large dash fascia for oversized electronics
  • Tinted acrylic walk-through windscreen
  • Painted white inside and out
  • Two transducer brackets
  • BayStar hydraulic steering
  • Sports steering wheel
  • Deluxe pedestal-mounted helm seats with slides and swivels
  • Folding rear lounge with backrest
  • Captain’s Pack
  • Wiring harness
  • Blade fuse holder
  • Tinned marine wiring harness with battery switch
  • SeaDek on side decks
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 175 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with twin rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded anchor-well cleat and two welded transom cleats
  • Two cup holders
  • Anchor winch brackets
  • Custom decals
  • 4 mm 5083 high-tensile aluminium bottom sheets
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile aluminium bottom sheets
  • Lenco trim tabs
  • Fully welded self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Fixed-bar bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
Print - 592 SunRunner

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

592 SunRunner Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.5m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 710kg
Horsepower Rec. 140hp
Horsepower Max 175hp
Pax 6 ppl

Features

  • 4 mm 5052 aluminium side sheets
  • 4 mm bulkheads and frames, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front deck with large walk-through hatch
  • Under-deck storage compartments
  • Large dash fascia for oversized electronics
  • Tinted acrylic walk-through windscreen
  • Painted white inside and out
  • Two transducer brackets
  • BayStar hydraulic steering
  • Sports steering wheel
  • Deluxe pedestal-mounted helm seats with slides and swivels
  • Folding rear lounge with backrest
  • Captain’s Pack
  • Wiring harness
  • Blade fuse holder
  • Tinned marine wiring harness with battery switch
  • SeaDek on side decks
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 200 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with twin rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded anchor-well cleat and two welded transom cleats
  • Two cup holders
  • Anchor winch brackets
  • Custom decals
  • 4 mm 5083 high-tensile aluminium bottom sheets
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile aluminium bottom sheets
  • Lenco trim tabs
  • Fully welded self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Fixed-bar bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
Print - 632 SunRunner

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

632 SunRunner Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.5m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 855kg
Horsepower Rec. 150hp
Horsepower Max 200hp
Pax 7 ppl

Features

  • 4 mm 5052 aluminium side sheets
  • 4 mm bulkheads and frames, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Raised front deck with large walk-through hatch
  • Under-deck storage compartments
  • Large dash fascia for oversized electronics
  • Tinted acrylic walk-through windscreen
  • Painted white inside and out
  • Two transducer brackets
  • BayStar hydraulic steering
  • Sports steering wheel
  • Deluxe pedestal-mounted helm seats with slides and swivels
  • Folding rear lounge with backrest
  • Captain’s Pack
  • Wiring harness
  • Blade fuse holder
  • Tinned marine wiring harness with battery switch
  • SeaDek on side decks
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 250 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with twin rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded anchor-well cleat and two welded transom cleats
  • Two cup holders
  • Anchor winch brackets
  • Custom decals
  • 4 mm 5083 high-tensile aluminium bottom sheets
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile aluminium bottom sheets
  • Lenco trim tabs
  • Fully welded self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Fixed-bar bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
Factory Options

Fully Welded Self-Draining Checkerplate Floor

Underfloor Kill Tank

Bait Board

Bait Board and Bait Tank

Transom Mounted Bait Tank

Bimini

Bait Board with Ski Pole Mount

Ski Pole

More From GRIDcore Plate Boats

SunRunner GRIDcore

SportsFisher GRIDcore

Pacific GRIDcore

Northerner GRIDcore