SeaBreeze GRIDcore

 

 

The result of years of in-house development, Horizon Boats' GRiDcore hull is equally at home during a relaxing family day on the water or a serious fishing session.

line_spacer
line_spacer

Make Your Day on the Water a Breeze

The Bowrider design has become one of the most popular styles in boat designs for the family, sharing the ample cockpit space between the front and the rear without giving away any of the features normally found aboard typical runabouts. Versatile and ideally suited to fishing or general boating ,your GRiDcore SeaBreeze can be optioned up with a Ski Pole or a Bait Board or both. 
The GRiDcore SeaBreeze range created by Horizon Aluminium Boats will certainly suit the boating family in every sense.
Like some others in the extensive range from Horizon, the GRiDcore SeaBreeze breed qualifies as all-rounders, capable of handling many varied roles associated with fun afloat
There are five models, ranging from 4.85 metres to 6.25 metres, each boasting its own appeal depending on the size required.
The GRiDcore SeaBreeze models will do their duty with outboard horsepower in the 90hp – 200hp bracket.

line_spacer

colorpicker-banner-button.jpg

Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

492 SeaBreeze Specs

Length Overall 5.00m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 560kg
Horsepower Rec. 80hp
Horsepower Max 115hp
Pax 5 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052-grade side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Sports consoles with passenger glove box
  • Wraparound tinted acrylic walk-through windscreen with opening door
  • Large dash fascia for oversized electronics
  • SeaStar Xtreme steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Folding rear lounge with backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

532 SeaBreeze Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90hp
Horsepower Max 140hp
Pax 5 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052-grade side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Sports consoles with passenger glove box
  • Wraparound tinted acrylic walk-through windscreen with opening door
  • Large dash fascia for oversized electronics
  • SeaStar Xtreme steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Folding rear lounge with backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 150 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

562 SeaBreeze Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 650kg
Horsepower Rec. 115hp
Horsepower Max 140hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052-grade side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Sports consoles with passenger glove box
  • Wraparound tinted acrylic walk-through windscreen with opening door
  • Large dash fascia for oversized electronics
  • Dometic BayStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Folding rear lounge with backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 175 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

592 SeaBreeze Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 710kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052-grade side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Sports consoles with passenger glove box
  • Wraparound tinted windscreen with opening door
  • Large dash fascia for oversized electronics
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Folding rear lounge with backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 200 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

632 SeaBreeze Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 765kg
Horsepower Rec. 150hp
Horsepower Max 200hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile bottom sheets
  • 4 mm 5052-grade side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Sports consoles with passenger glove box
  • Wraparound tinted windscreen with opening door
  • Large dash fascia for oversized electronics
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Folding rear lounge with backrest
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • 250 L long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four riveted aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Ski pole
  • Bait board with ski-pole mount