Getaway GRIDcore

 

 

The result of years of in-house development, Horizon Boats' GRiDcore hull is equally at home during a relaxing family day on the water or a serious fishing session.

line_spacer
line_spacer

Need to get away from it all?

Getaway – sort of says it all.

Fancy a weekend away, an overnight stay at a secluded anchorage?

Then this new range from Horizon Aluminium Boats will fulfil your dreams.

Eminently suited for family cruising, the Getaway range comprises four excellent cuddy cabin boats in the 5.15-metre to 5.70-metre range.

Built on a superb hull, which offers stability and a soft ride, the Getaway series will appeal to all in the family when a day (or a weekend) out on the water is the plan.

With Horizon’s FastBack transom, fuel efficiency and ample cabin space for protection from the elements, one of the Getaway models will gladden the heart of the most jaded boater.

Select your outboard from the range, 75hp to 150hp and call all hands on deck!

You’re ready to set a course for family fun afloat.

line_spacer

colorpicker-banner-button.jpg

Series

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

532 Getaway Specs

Length Overall 5.40m
Beam 2.40m
Depth 1.35m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 610kg
Horsepower Rec. 90hp
Horsepower Max 140hp
Pax 5 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • SeaStar Xtreme steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

562 Getaway Specs

Length Overall 5.70m
Beam 2.45m
Depth 1.45m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 650kg
Horsepower Rec. 115hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • Dometic BayStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

592 Getaway Specs

Length Overall 6.00m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 710kg
Horsepower Rec. 140hp
Horsepower Max 150hp
Pax 6 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

632 Getaway Specs

Length Overall 6.40m
Beam 2.50m
Depth 1.50m
Bottom Sheet 4mm
Side Sheet 4mm
Transom XL
Weight (boat only) 765kg
Horsepower Rec. 150hp
Horsepower Max 200hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Portable toilet in a separate compartment
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

662 Getaway Specs

Length Overall 6.70m
Length Bow to Transom 6.60m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm
Side Sheet 4mm
Transom XL
Weight (boat only) 960kgs
Horsepower Rec. 175hp
Horsepower Max 225hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Portable toilet in a separate compartment
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash

Diagram shows standard features and general configuration. Proportions will vary for each model. This drawing is not to scale. Measurements and weights subject to variation and should be used as a guide only.

732 Getaway Specs

Length Overall 7.70m
Length Bow to Transom 7.30m
Beam 2.5m
Depth 1.5m
Bottom Sheet 5mm
Side Sheet 4mm
Transom XL
Weight (boat only) 1400kg
Horsepower Rec. 250hp
Horsepower Max 300hp
Pax 7 ppl

Features

  • 4 mm 5083 high-tensile keel sheets
  • 4 mm 5052 side sheets
  • 4 mm bulkheads and frame grid, fully welded to the hull—not floating
  • Full-height transom with twin boarding platforms
  • Walk-through transom door
  • Fully welded gunwales and side decks
  • Extruded side decks
  • RAILBLAZA TracLoader extrusion
  • Enclosed rear transom with twin hatches
  • Large aluminium anchor well
  • Aluminium half cabin with opening hatch
  • Large cabin design with spacious bunks
  • Large dash fascia for oversized electronics
  • Tinted acrylic wraparound windscreen
  • SeaStar hydraulic steering
  • Sports steering wheel
  • Pedestal-mounted deluxe folding helm seats on slides and swivels
  • Portable toilet in a separate compartment
  • SeaDek on side decks
  • 5-gang switch panel with 12 V socket
  • Automatic bilge pump
  • LED navigation and anchor lights
  • Carpeted timber floor
  • Australian Standards-approved underfloor foam flotation
  • Folding rear lounge with backrest
  • Long-range aluminium fuel tank with sender unit
  • Heavy-duty dive boarding ladder
  • High 32 mm bow rails
  • Heavy-duty bow sprit with double rollers and rope keepers
  • 32 mm transom rails
  • 32 mm side rails
  • Two large side pockets
  • Four aluminium rod holders
  • One welded alloy cleat in the anchor well
  • Two welded alloy cleats on the transom
  • Two cup holders
  • Two transducer brackets
  • Painted white inside and out
  • Custom decals
  • Anchor winch brackets
  • Captain’s Pack
  • Wiring harness
  • Switch panel
  • Blade fuse holder
  • Increased wiring gauge
  • Dual-battery switch with VSR
  • Access panels in side ribs

Options

  • 5 mm 5083 high-tensile bottom sheets
  • Lenco trim tabs
  • Fully welded, self-draining checkerplate floor
  • Underfloor kill tank
  • Bait board
  • Bait board with bait tank
  • Transom-mounted bait tank
  • Aluminium targa bar
  • Bimini
  • Front clears
  • Ski pole
  • Bait board with ski-pole mount
  • Double dash